Hone-All is the specialist provider of honing and super finishing services.
Honing is the process used to finish round bores using abrasive stones to achieve close tolerances, excellent surface finishes & improved geometry. Specialist tubing is often only available in a standard range of sizes & so it is necessary to use honing to produce non-standard sizes & finishes.
|
|
|
Minimum Bore Diameter. |
1.5mm 0.059" |
Maximum Bore Diameter. |
700mm 27.559" |
Maximum O.A.L. |
3000mm 118.11" |
Bore Tolerance under 76.2mm/3". |
+/-0.002mm +/-0.00008" |
Bore Tolerance over 76.2mm/3". |
+/-0.05mm +/-0.002" |
Surface Finish (Drilling Only) |
0.5μ 2 CLA |
Accuracy (Drill Wander / T.I.R.) |
0.025mm per 25.4mm 0.001"per 1"drilled |
|
All Materials |
Shapes Machined. |
Any |
|
|
|
It can be more cost effective to bore, hone & turn a billet to produce bespoke precision tubing than it is to purchase a standard tube & hone to size.
Examples of Work
Drive Shafts, Rifle Barrels, Valve Blocks,
Con Rods, Nozzles, Accumulators, Engine Blocks, Impellers, Anti-Roll Bars, Compressor Cylinders, Hydraulic Tubing.
|
|
